I have an old weldmate 75 by SIP. The rated max output is 75 amps and I bought some Hobart 6011 in 3/32. The box said 60-90 required amps. It is very difficult to hold an arc. The rod is constantly sticking and it pops and cuts out when it does start welding.
It runs 1/16 rod really well but 1/16th is 10$ for 1lb and 3/32 is 20$ for 5lb. So more than twice as expensive!
It runs 1/16 rod really well but 1/16th is 10$ for 1lb and 3/32 is 20$ for 5lb. So more than twice as expensive!
