Suitable plasma torch for Cemont Sharp 25 MC WT

RedDevils · Jul 16, 2019

Hello to all,

I have a plasma cutter machine Cemont Sharp 25 MC WT with damaged torch. I have replaced the torch with another torch HF, but the machine did not make ignition.

The question is if HF plasma torch is suitable for this machine. This machine has ''blowback'' system, not HF.

Thank you in advance.

mechanic416 · Jul 16, 2019

Here is a cheap one on ebay that will work 173963700849

RedDevils · Jul 17, 2019

Because of i have bought this machine now, i don't know if the machine have problem or the new torch that i have mount is unsuitable. It have not arc for ignition.
Therefore i would like if anybody know to let me know if HF plasma torch work right on this machine that have "blowback" system for arc ignition.

jimcolt · Jul 17, 2019

My suggestion is to contact the Plasma cutter manufacturer, I'm sure they have a tech service line that can help you!

Well, that is what I would recommend for a Hypertherm or an Esab or any major brand plasma.....

Munkul · Jul 17, 2019

A HF torch will not work with a blowback ignition machine, the two technologies are physically incompatible.

RedDevils · Jul 18, 2019

Thank you very much. So first i will change the torch.

Suitable plasma torch for Cemont Sharp 25 MC WT

Top Contributors this Month

Recommended Communities